I’ve been wanting to try this craft with my girls for a while; it is a great way to learn how to use a hammer and nails! I never did this as a child, but my little brother did, and his string art masterpiece hung in his room for years. The nice thing about this craft is that you can make it simple or complicated, depending on the skill level of the people doing it. We went with really simple, perfect for a busy day’s work!

String Art

Materials:
– 1 piece of 1/2″to 3/4″ thick wood, approx 12″ by 12″ (pine preferred)
– 1 colour of acrylic paint
– 20 (or so) 1″ long common framing nails
– scraps of thin yarn or string
– sawtooth picture hanger & screws

Supplies Needed:
– fine-grain sandpaper
– paintbrush
– hammer
– wooden clothes pin
– screwdriver

1. We started with a 12″ by 12″ piece of 1/2″ pine shelving left over from an old project. Pine is inexpensive and easy to hammer nails into. Such a small piece can be often be found inexpensively (or free) off-cut from a home improvement store. If you’re not handy with a saw, most reno stores will cut wood to size if you ask.

2. Using fine-grain sandpaper, give the piece of wood a quick once-over to remove any splinters.

3. You can leave the wood unfinished (in fact, a lot of string art is done on gorgeous, rustic barn board), but my girls opted to paint theirs. Two coats of crafting acrylic turned Thing 2’s board an eye-searing pink, while Thing 1 chose a more muted lavender. Don’t forget to cover your work surfaces with paper or plastic if you care at all if it gets stained! (Graffito from the kids is optional.)

4. Nail in the nails in the pattern of your choice. My kids went for an abstract creation of their own design. However, any number of designs and shapes can be downloaded off of the Internet, printed out, and then taped onto the top of the wood. You can then nail along the edges of the design, and rip the paper away when you’re done. Alternately, you can freehand a design in pencil and then paint over the marks before you add the string.

Since the kids hadn’t done much hammering with full-sized hammers before, we used wooden clothes pins to hold the nails upright while they got them started. This keeps their fingers away from the hammer, at least until they have a little bit more precision! (It stunned Thing 1 that I could hold a nail while hammering without smashing my fingers.)

Thing 1 went with a free-form design.

Thing 2 went with a more geometric plan.

5. Tie a few knots around one of the nails, and then go to town wrapping the string around the nails!

6. If you’re planning on hanging the string art on the wall, using a screwdriver, attach a sawtooth picture hanger with screws to the top back of the piece. Alternately, it can be propped on shelf, or held up by a mini easel.